68
CP-WX11000 ( P6WX )
8. Assembling and Disassembling the Duct.
a. Assembling and Disassembling the bottom case.
b. Assembling and Disassembling the Upper case.
c. Attaching and Detaching the two cases.
Use 3x16 (long) screws.
• Pass fan cable between
duct wall and fan, and
draw out cable from slit.
• Insert head of air sensor vertically,
and touch head to wall. Then, Attach
air sensor by sensor lock.
• Attach upper case to bottom case combining
10 hools. Never pinch cables.
• Hang cable on two hooks.
To Next Page
Loading...
