70
CP-WX11000 ( P6WX )
12. Detaching the Shift cover.
13. Assembling the Control unit.
CAUTION
• Combine KEYPAD board and Control unit case by 5
hooks completely.
• Tighten 2 screws after you attached KEYPAD board to
Control unit case. ( Torque : 0.588
~
0.784Nm )
Shift cover
Remove this cushion before
you detach the shift cover.
2 screws
KEYPAD board
5 hooks
14. Attaching the thermistor to lamp house.
CAUTION
Attach thermistor in right direction.
Turn cable side to upper
Lamp house
Thermistor
NG OK
When attach/detach shift
cover, never make it touch
motor terminal.
Thermistor
Stopper
Insert Stopper with a click.
To Next Page
Loading...
