Hitachi CP-WX9210 - Page 33

33
2. Connection to the network
Item Description
MY IMAGE
Selecting this item displays the MY
IMAGE menu.
Use the application to transfer the
image data. It can be downloaded
from the Hitachi web site.
Refer to 5. My Image Function (
78) for the details of MY
IMAGE.
Select an item of still image by the MY IMAGE and the ► or
ENTER button to display the image.
• The item without stored image cannot be selected.
• Each image name is displayed in 16 characters or less.
To switch the image displayed
Use the ▲/▼ buttons.
To return to the menu
Press the ◄ button on the remote control.
7RHUDVHWKHGLVSOD\HGLPDJHDQGLWVVRXUFH¿OHLQWKH
projector.
(1) Press the RESET button on the
remote control while displaying an
image to display the MY IMAGE
DELETE menu.
(2) Press the ► button to erase.
To stop erasing, press the ◄ button.
AMX D.D.
(AMX Device
Discovery)
Use the ▲/▼ buttons to turn the AMX Device Discovery on/off.
ON

OFF
When ON is selected, the projector can be detected by
controllers of AMX connected to the same network. For the
details of AMX Device Discovery, visit the AMX web site.
URL: http://www.amx.com/
(continued on next page)