Hitachi CP-WX9210 - Main Window

67
3. Web Control
3.2 Crestron e-Control
®
(continued)
3.2.1 Main window
You can operate the basic controls of the projector on this screen.
• If the projector is in the standby mode, only the [Power] button can
be operated.
NOTE
1
.
Click a button and operate as follows.
Button Description
Power Turns the power on/off.
2. Sources List
You can click a button to switch the input channel. The cursor will move
according to the currently selected input port.
Button Description
Computer in1
(CP-X9110/WX9210/WU9410
CP-X9111/WX9211/WU9411)
Selects input from COMPUTER IN1 port.
Computer in2
(CP-X9110/WX9210/WU9410
CP-X9111/WX9211/WU9411)
Selects input from COMPUTER IN2 port.
Computer In
(CP-HD9320/HD9321)
Selects input from COMPUTER IN port.
HDMI 1 Selects input from HDMI 1 port.
HDMI 2 Selects input from HDMI 2 port.
DVI-D Selects input from DVI-D port.
HDBaseT Selects input from HDBaseT port.
SDI/DIGITAL 1
(CP-HD9320/HD9321)
Selects input from SDI/DIGITAL 1 port.
Video Selects input from VIDEO port.
LAN Selects input from LAN port.
1
4
2
3
1
4
2
3
CP-X9110/WX9210/WU9410
CP-X9111/WX9211/WU9411
CP-HD9320/HD9321