Hitachi CP-WX9210 - Display Mode; Single PC Mode; Multi PC Mode

75
4. Network Presentation
LiveViewer has two display modes, Single PC mode and Multi PC mode.
4.2 Display Mode
The Single PC mode can display images in full screen from one computer to the
projector/switcher via wireless LAN or wired LAN.
4.2.1 Single PC mode
■ Presenter Mode
In the Single PC mode, the projector can be occupied by one computer and
can block access from any other computers (if Presenter Mode is set to ON in
LiveViewer). While making your presentation, you don’t need to worry that the
image on screen will be unexpectedly switched to an image sent by another
computer. Presenter Mode can be set to ON in the option menu in the LiveViewer.
The projector can display images of up to four computers connected at the same
time.
4.2.2 Multi PC mode