Item Description
VIDEO FORMAT
The video format for S-VIDEO port and VIDEO port can be set.
(1) Use the ▲/▼ buttons to
select the input port.
S-VIDEO
ó
VIDEO
(2) Using the ◄/► buttons
switches the mode for video
format.
AUTO
ó
NTSC
ó
PAL
ó
SECAM
N-PAL
ó
M-PAL
ó
NTSC4.43
• This item is performed only for a video signal from the VIDEO port
or the S-VIDEO port.
• The AUTO mode automatically selects the optimum mode.
• The AUTO operation may not work well for some signals. If the
picture becomes unstable (e.g. an irregular picture, lack of color),
please select the mode according to the input signal.
COMPUTER IN
The computer input signal type for COMPUTER IN1 and IN2 ports
can be set.
(1)
Use the ▲/▼ buttons to select the COMPUTER IN port to be set.
COMPUTER IN1
ó
COMPUTER IN2
(2) Use the ◄/► buttons to select
the computer input signal type.
AUTO
ó
SYNC ON G OFF
• Selecting the AUTO mode allows
you to input a sync on G signal or component video signal from the
port. Please refer to “Technical” for the connection of component
video input to COMPUTER IN1/2 port.
• In the AUTO mode, the picture may be distorted with certain
input signals. In such a case, remove the signal connector so that
no signal is received and select the SYNC ON G OFF, and then
reconnect the signal.
FRAME LOCK
Set the frame lock function on/off for each port.
(1) Use the ▲/▼ buttons to select the input ports.
COMPUTER IN1
ó
COMPUTER IN2
(2) Use the ◄/► buttons to turn the
frame lock function on/off .
ON
ó
OFF
• This item can be performed only on a signal with a vertical
frequency of 49Hz to 51Hz, 59 to 61 Hz.
• When ON is selected, moving pictures are displayed more
smoothly.
• This function may cause a certain degradation of the picture. In
such a case, please select OFF.
(continued on next page)
To Next Page
Loading...
Need help?
General