36
AUDIO menu
AUDIO menu
From the AUDIO menu, items shown in the table
below can be performed. Select an item using the
▲/▼ cursor buttons, and press the ► cursor button
or the ENTER button to execute the item. Then
perform it according to the following table.
Item Description
VOLUME
Using the ◄/► buttons adjusts the volume.
High
ó
Low
SPEAKER
Using the ▲/▼ buttons turns on/off the built-in speaker.
ON
ó
OFF
When OFF is selected, the built-in speaker does not work.
AUDIO SOURCE
The combination of a picture and audio input port can be arranged
in the menu.
The audio coming into the port selected in the (2) is output while an
image from the port chosen in the (1) is on screen.
(1) Choose a picture input port using the ▲/▼ buttons.
• Select AUDIO OUT STANDBY to specify the output from the
AUDIO OUT ports in the standby state. This selection is available
only when NORMAL is selected for the STANDBY MODE
(
35
).
The built-in speaker does not work in the standby state.
• While RETURN is selected, pressing the ◄ button returns to the
previous menu.
(2) Select one of the AUDIO IN ports using ◄/► buttons.
AUDIO IN1
ó
AUDIO IN2
ó
AUDIO IN3
ó
• disables the audio output.
•
C.C. (Closed Caption) is automatically activated when is selected
and an input signal containing C.C. is received. This function is
available only when the signal is NTSC for VIDEO or S-VIDEO, or
480i@60 for COMPONENT, COMPUTER IN1 or COMPUTER IN2,
and when AUTO is selected for DISPLAY in the C.C. menu under the
SCREEN menu (
41).
COMPUTER IN1
ó
COMPUTER IN2
AUDIO OUT STANDBY
COMPONENT
VIDEO
ó
S-VIDEO
ó
(Y, Cb/Pb, Cr/Pr)
To Next Page
Loading...
Need help?
General