34
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
Wiring diagram 3
Wiring of power supply block 2
(1) Attach POWER FAN
(2) Wire CNGD1 and attach FE2
(3) Wire CNBAR and EXHAUST FAN cable
CNBAR
Attach the POWER FAN to the
power supply block.
Pass the CNBAR
through this hole.
Pass the EXHAUST FAN cable
(#3040) through this hole.
Top of power supply block
#3040
Pass the CNGD1 through the ferrite
core of the AC-INLET cable.
Pass the CNGD1 through the
ferrite core FE2.
CNGD1
AC-INLET
cable
AC-INLET
cable
CNGD1
TSW
Pass the CNLAP
through this hole.
To Next Page
Loading...
