38
CP-X2520 ( M2-25ED ) / CP-X3020 ( M2-30ED )
Wiring diagram 7
Wiring of MAIN board and INPUT board
(1) Attach Wire CNVID
CNVID
Make sure to put the excessive
length of the CNVID.
Otherwise, the wire may touch
the optical unit when you attach
this block.
Connect both ends of
the CNVID with a click.
Check the tape is not bended or the
#3 wire is close to any other wires.
Keep the #3 wire away from the
other.
y touch the optical unit when you
attach this block.
15 to 30mm
To Next Page
Loading...
