Hitachi CP-X608 - How to Use the Slot Cover Lock; Connecting Power Supply

13
Setting up
How to use the slot cover lock
1.
Open the slot cover lock, and insert it into the
locking a slot.
2.
Close the slot cover lock slowly, and attach a
padlock or combination lock to the slot cover
lock.
Connecting power supply
1.
Connect the connector of the power cord to the AC inlet of the projector.
2.
Firmly plug the power cord's plug into the outlet.
AC inlet
to the outlet
Connector of the power cord
SD CARD SD CARD
WARNING ŹPlease use extra caution when connecting the power cord, as
LQFRUUHFWRUIDXOW\FRQQHFWLRQVPD\UHVXOWLQ¿UHDQGRUHOHFWULFDOVKRFN
• Only use the power cord that came with the projector. If it is damaged, contact
your dealer to newly get correct one.
• Only plug the power cord into an outlet rated for use with the power cord's
VSHFL¿HGYROWDJHUDQJH7KHSRZHURXWOHWVKRXOGEHFORVHWRWKHSURMHFWRUDQG
easily accessible. Remove the power cord for complete separation.
• Never modify the power cord.