Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)09-01-20]
Rev.0.1
INST(RM)09-01-20
9.1 Removing PDUs for a Rack and PDU Power Codes
Removing the PDUs (A-F6516-PDU6) for a rack and PDU power codes (A-F6516-P620).
1. Removing PDU power cables
(1) Turn off the breaker on the distribution board connected to the PDU power cable.
(2) Turn off the breaker of the PDU to be removed.
(3) Open the stopper of the PDU on the right side of the rear of the rack frame and remove the PDU
power cable.
(4) Remove the PDU on the left side in the similar procedure.
Figure 9-1 Removing PDU Power Cables
A-F6516-PDU4
The third set
A-F6516-PDU9
The second set
A-F6516-PDU9
The first set
Breaker
OFF
Rear view
PDU (front view)
To Next Page
Loading...
