Hitachi DKC910I - 6 Removing Disk Board (DKB)

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)06-01-10]
Rev.2
INST(RM)06-01-10
6. Removing Disk Board (DKB)
Be sure to read the notice shown below before performing the following procedure.
NOTICE: Before removing Disk Boards (DKBs), check that Drive Boxes are already removed.
If Drive Boxes are not yet removed, remove them by following the procedure in “4.
Removing Drive Boxes”.
1. Connecting the Maintenance PC
Connect the Maintenance PC to the SSVP, and then log in to the SVP.
• “Attachment/Removal Procedure of Maintenance PC” (INST(IN)13-02-10)
• “Connection to the SVP” (SVP01-30)
2. Starting the SVP window
From the menu of Web Console, click [Maintenance Components] - [Maintenance Other Components].
3. Changing the operation mode
Change the mode to [View Mode].
4. Starting Maintenance Utility
In the SVP window, click [Maintenance Utility] (See “Starting Maintenance Utility” (MU01-10).).