Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)05-01-70]
7. <Check Removal Completion>
Click [Close] in the Remove Channel Board window.
8. For VSP 5500 and VSP 5500H, go to Step 9.
For VSP 5100 and VSP 5100H, repeat the procedure from Step 5 to remove the other Channel Board.
9. Checking Normality
Perform the procedure described in "Checking Normality" (TRBL02-06-10).
10. Click [Logout] to close the window.
11. Removing the Maintenance PC
Remove the Maintenance PC from the storage system referring to “Attachment/Removal Procedure of
Maintenance PC” (INST(IN)13-02-10).
Rev.1
INST(RM)05-01-70
To Next Page
Loading...
