Hitachi DKC910I - Page 103

Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)09-01-50]
Rev.0.1
INST(RM)09-01-50
2. Removing PDUs
(1) Remove two screws from the PDU on the right side of the rear of the rack frame and remove the
PDU.
(2) Remove the PDU on the left side in the similar procedure.
Figure 9-4 Removing PDUs
Screw
(SB510N)
Screw
(SB510N)
PDU
Rack frame
Rear view of rack frame