Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-20]
Rev.3
INST(RM)04-03-20
5. Instructing to start removal by Maintenance Utility
(1) <Main Window>
Click the [Chassis] tab in the main window, and click [Remove] and select [DKU].
(2) <Specify Removal DKUs>
Select the number of DKUs to be removed and click [Remove] .
NOTE : The error list window is displayed if multiple errors are detected by the prior check.
If it is displayed, click the text of “Error Code” and recover the failures or the
blockade in accordance with the details of the displayed errors.
To Next Page
Loading...
