Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-60]
Rev.0.1
INST(RM)04-03-60
9. Removing the Power Cables
(1) Check the connection of the power cables.
Figure 4-4 shows a connection example of power cables in the configuration that only SBX/
UBX/FBX are installed in the same rack.
(2) Open the stopper and remove two power cables from the PDU.
Figure 4-3 Removal Example of Power Cables
Stopper
Left PDU
Power Cable
Power Cable
Right PDU
[Removal example (when removing from 1)]
4
5
1
2
3
Stopper
9
6
7
8
4
5
1
2
3
9
6
7
8
To Next Page
Loading...
