Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)04-03-160]
Rev.2
INST(RM)04-03-160
(3) Removing DBPSs
(a) Bring the handle down and forward (
) while pushing the latch of the DBPS inward (
).
(b) Pull the DBPS and remove it from the Drive Box.
(c) Remove the other DBPS in the same manner.
Figure 4-15 Removal of DBPS (SBX/UBX/NBX)
*1 : DBPSxxx-1
DB No. (000, 001, 002, ........, 191)
*2: UBX is illustrated as an example in the figure. The procedure for SBX/NBX is the same as that for
UBX.
DBPSxxx-1 DBPSxxx-2
Rear view of UBX
DBPSxxx-1 DBPSxxx-2
Rear view of SBX
Latch
DBPSxxx-1
Handle
Handle
Latch
DBPSxxx-2
Rear view of NBX
DBPSxxx-1
DBPSxxx-2
To Next Page
Loading...
