Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-130]
Rev.0.1
INST(RM)08-01-130
(a) Removing the SVP
(i) Remove all LAN cables from the SVP.
(ii) Open the lever while pressing its latch securing the SVP.
(iii) Open the lever completely until the SVP is pulled out toward you.
(iv) Remove the SVP by pulling it out while holding it with your hands.
Figure 8-5 Removing the SVP
HSNBX
SVP
Lever
Latch
To Next Page
Loading...
