Copyright © 2019, 2021, Hitachi, Ltd.
DKC910IHitachi Proprietary
[INST(RM)08-01-180]
(a) Removing the SSVP
(i) Remove the cables from the SSVP.
(ii) Open the lever while pressing its latch securing the SSVP.
(iii) Open the lever completely until the SSVP is pulled out toward you.
(iv) Remove the SSVP by pulling it out while holding it with your hands.
Figure 8-8 Removing the SSVP
HSNBX
Lever
Latch
SSVP
Rev.0.1
INST(RM)08-01-180
To Next Page
Loading...
