Hitachi DZ-GX5040E - Arranging Order of Scenes (Move)

English
98

ARRANGING ORDER OF SCENES (MOVE)
1 Press the DISC NAVIGATION button.
2 Press the MENU button.
3 Use the 2/1/0/// buttons to
choose “Select” on the “PlayList” menu
screen, and then press the  button.
Select the play list to be edited, and then press
the  button.
4 Select the scene to be moved.
You can also select multiple scenes (see pages
76 and 88).
5 Press the MENU button.
6 Choose “Scene”, “Edit”, “Move”, and then
press the  button.
7 The “Move Scene” screen will appear: If you
are sure you want to move the scene, press
the  button.
If you want to change the scene selected in
step 4, you can do it on this screen.
8 Move the “ ” mark to
the position where you
wish to move the scene,
and then press the 
button.
9 The screen for verifying move will appear:
Choose “YES”, and then press the 
button.
Choose “NO” to cancel move.
After Yes or No setting, the scene select screen
will be restored.
Repeat steps 7 – 9 to move another scene.
10Press the  button to quit.
Note:
• If you press the MENU button before pressing the
 button in step 7, the submenu screen will appear
(p. 81).
• Only scenes on play list can be moved.
• When using DVD-RAM, scenes can be moved only
when “Category: All” is specified (p. 105).
Se lect I nsert Point 006/019
ENTER RETURN