119
English
Recording (Dubbing) Images On Other
Video Devices
You can record (dub) images played back on this DVD video camera/recorder, on other video
devices.
Use the AV/S output cable (provided) to connect the DVD video camera/recorder to another video
device as shown in the following figure:
1 Press the DISC NAVIGATION button.
2 Select a scene to be played back.
3 Set the channel of the connected video device
to an external input.
4 Press the playback () button on this DVD
video camera/recorder and the record button
on connected device: The DVD video
camera/recorder will start playback and the
recorded device will record (dub) it.
Note:
• Using S-VIDEO will enable you to record clearer
images.
• Reduce the volume of external input sound heard
from the built-in speaker: The loud volume may cause
noise to enter the recorded image.
• It is recommended that you use Disc Navigation to
create a play list including the scenes to be dubbed
among the scenes recorded on this DVD video
camera/recorder (p. 101).
Before You Begin
• Before connecting this DVD video camera/recorder to another device,
be sure to turn both devices off.
• Insert a recordable disc*
1
or card*
2
into this DVD video camera/recorder
(see pages 27 and 28).
*
1
No photo can be recorded.
*
2
Only photos can be recorded: No video can be recorded.
• If you operate the DVD video camera/recorder connected to another
device, always power the camera/recorder from AC outlet using the AC
adapter/charger.
• If you use a Hitachi VCR, it will be operated by the remote control*
provided with the DVD video camera/recorder. When recording an
image from a Hitachi VCR, change the remote control code of the VCR
to other than “VCR2”.
* The remote control is not provided with DZ-HS500E.
* If the video device to be connected has an S-VIDEO input jack, you can connect it to the DVD video camera/
recorder.
HDD
To Next Page
Loading...
