English
97
13
SELF-TIMER
You can record photos using the self-timer function, as with ordinary cameras.
1Press the MENU button,
choose “Self Timer” on
the “Record Functions
Setup” menu screen, and
then press the A
button.
2Select “On”, and then press the A button.
The self-timer will be set.
3Press the MENU button to end the setting.
4Press the REC button.
The recording indicator at the front of DVD
video camera/recorder will blink.
The self-timer indicator will start to count
down, and recording will commence
approximately 10 seconds later.
Note:
• You can also check that self-timer has been set by
reviewing the on-screen information.
• To release the self-timer mode, choose “Off” on the
menu screen or turn DVD video camera/recorder off.
• To suspend self-timer, press the REC button again
before recording starts, or press the
C button.
The self-timer function is valid only when recording photos (stills).
OSD Ou t p u t
On
Off
RAM
Se l f T i mer
ENTER RETURN
Record Funct ions Setup
10
999
REM
8:00
30/ 9/2004
Self-timer recording
To Next Page