Need help?Do you have a question about the Hitachi E1090 and is the answer not in the manual?
Procedure for unpacking the storage system, inspecting for damage, and verifying component locations in the rack.
Instructions for installing controllers and drive boxes into the rack and cabling the drive boxes to the controller.
Steps for connecting the storage system to power, cabling the management console, and powering on the system.
Guide to initial system setup using the Windows-based management console, including network and password configuration.
Procedures for connecting hosts to the storage system and registering the system with Hitachi Vantara Support.
Instructions for downloading, installing, and configuring the Hitachi Remote Ops monitoring system for service notifications.
To Next Page
General