Note: Although a tab is provided for configuring email notifications, we
recommend that you set up email notifications using Hitachi Remote Ops
monitoring system.
2. To configure the storage system to send notifications in syslog format, complete the
settings in the Syslog tab. Then open a firewall port on your network for transferring
syslogs.
3. To configure the storage system to send notifications as SNMP traps, complete the
settings in the SNMP tab.
4. Click Apply, and then click OK.
Step 10: Make host connections
Host attachment tasks include configuring ports and preparing the host hardware and
software for connection to the storage system. For information and instructions, see the host
attachment preparation procedures in the Open-Systems Host Attachment Guide. You will
also find the following resources helpful:
■
For the latest interoperability and compatibility information about supported hosts and host
attachment hardware, see the Hitachi Vantara Interoperability Reports.
■
For information about preparing your hosts for use with the storage system, see the
documentation for the product.
Step 10: Make host connections
Installing your storage system
Hitachi Virtual Storage Platform E1090 Installation Guide 25
To Next Page
Loading...
