Synchronizing Time To synchronize the storage system time
with the NTP server at a specific time,
enter the time when the two will be
synchronized.
13. Confirm or change the network settings that you entered earlier in this procedure, and
then click Apply.
14. When prompted that initial settings are complete, click Close.
Next steps
(Optional) Configure syslog and SNMP notifications.
Configure syslog and SNMP notifications
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. In the navigation tree of the maintenance utility, under Administration, click Alert
Notifications. Then click Set Up in the Alert Notifications pane on the right.
Configure syslog and SNMP notifications
Installing your storage system
Hitachi Virtual Storage Platform E1090 Installation Guide 24
To Next Page
Loading...
