If the login window does not appear, check whether the browser is configured to allow
pop-ups. If pop-ups are allowed, make sure the management console IP address is set
to 192.168.0.18 and the subnet mask is set to 255.255.255.0. If the IP address and
subnet mask are correct and pop-ups are allowed, but the login window does not
appear, contact customer support.
3. In the top-right corner, click the gear icon, and then select User Administration.
4. Click Support Personnel Group.
5. On the Users tab, select the maintenance user check box if it is not already selected,
and then click Edit.
Changing the password
Installing your storage system
Hitachi Virtual Storage Platform E1090 Installation Guide 17
To Next Page
Loading...
