Hitachi HUS VM - Page 382

raidcom modify ldev -command_device
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E30 0074 The specified LDEV cannot be operated because it
is an external volume mapped for online data
migration.
CMDRJE Executing 2E30 0096 The specified LDEV is used as an ALU.
Get Command
Status
Async 2E30 0206 The operation cannot be performed because the
specified LDEV is a deduplication system data
volume.
CMDRJE Executing 2EE8 FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
Table 9-31 SSB codes returned by raidcom modify ldev -ssid
raidcom modify ldev -ssid
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E11 0023 SSID cannot be changed because there are LDEVs
in the boundary where the specified LDEV belongs.
CMDRJE Executing 2E22 7201 The specified SSID is used for the other boundary.
CMDRJE Executing 2EE8 FEEC An internal error occurred. Call Hitachi Data
Systems customer support.
CMDRJE Executing 2EF3 0002 The specified parameter is invalid. Check the
Command Control Interface Command Reference.
Table 9-32 SSB codes returned by raidcom modify ldev -status nml
raidcom modify ldev -status nml
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 0000 The LDEV number is out of settable range.
Get Command
Status
Async 2E10 0000 The specified LDEV is used for a ShadowImage
pair.
Get Command
Status
Async 2E10 0001 The specified LDEV is used for a TrueCopy pair or a
Universal Replicator pair.
Get Command
Status
Async 2E10 0003 The specified LDEV is used as a Compatible
FlashCopy® V2 relationship.
Get Command
Status
Async 2E10 0004 The specified LDEV is used for a Thin Image pair or
a Copy-on-Write Snapshot pair.
9-58
Troubleshooting
Command Control Interface User and Reference Guide