Hitachi HUS VM - Page 480

raidcom reallocate pool
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E21 9000 The program product of Dynamic Tiering or active
flash is not installed.
CMDRJE Executing 2E30 6002 Start or stop of performance monitor by hand
cannot be performed because it is a pool for
Dynamic Provisioning or it is automatic execution
mode.
CMDRJE Executing 2E30 6003 The specified pool is the one for Thin Image or
Copy-on-Write Snapshot.
CMDRJE Executing 2E31 6000 Reallocation cannot be performed because there is
only one Tier in the pool group.
CMDRJE Executing 2EE7 FEEC An internal error occurred. Call Hitachi Data
Systems customer support.
Table 9-106 SSB codes returned by raidcom extend ldev
raidcom extend ldev
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing - - See the troubleshooting topics in the Provisioning
Guide for the storage system.
Table 9-107 SSB codes returned by raidcom delete resource
raidcom delete resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 2201 The specified resource group cannot be operated.
CMDRJE Executing 2E10 2201 Resource groups cannot be deleted because the
resource groups are locked.
CMDRJE Executing 2E10 2202 The LDEV and the host group cannot be set to the
different virtual storage machine.
CMDRJE Executing 2E20 0100 There is no parity group.
CMDRJE Executing 2E20 2200 A resource group cannot be deleted because the
specified resource group is undefined.
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E21 9305 The information for the virtual storage machine is
set in the specified resource.
9-156
Troubleshooting
Command Control Interface User and Reference Guide