raidcom delete resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E22 2202 A resource group cannot be deleted because a
resource belongs to the specified resource group.
CMDRJE Executing 2E22 2203 A resource cannot be deleted from the resource
group because the specified LDEV number is not
the top LDEV number in the LUSE volume.
CMDRJE Executing 2E30 2201 The operation to resource group 0 (meta_resource)
cannot be performed.
CMDRJE Executing 2ECA FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
CMDRJE Executing B980 B904 The command was rejected because the selected
resource group belongs to
NAS_Platform_System_RSG.
Table 9-108 SSB codes returned by raidcom add resource
raidcom add resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E00 2200 The specified resource group name is against the
naming rules.
CMDRJE Executing 2E00 2201 The specified resource group cannot be operated.
CMDRJE Executing 2E00 2202 The resource ID and the sub-resource ID are out of
the effective range.
CMDRJE Executing 2E00 8000 The machine type is invalid.
CMDRJE Executing 2E00 8001 The serial number is invalid.
CMDRJE Executing 2E00 8400 The value of the specified port is invalid.
CMDRJE Executing 2E10 2202 The LDEV and the host group cannot be set to the
different virtual storage machine.
CMDRJE Executing 2E20 0100 There is no parity group.
CMDRJE Executing 2E20 2200 You cannot execute this command because of
either reason below.
• A resource cannot be added to the resource
group because the specified resource group is
undefined.
• A resource group name cannot be changed
because the specified resource group is
undefined.
Troubleshooting
9-157
Command Control Interface User and Reference Guide
To Next Page
Loading...
