raidcom add resource
Error message
Executing/
Async
Error code
Description
SSB1 SSB2
CMDRJE Executing 2E20 4100 There is no external volume group.
CMDRJE Executing 2E20 8400 The specified port is not installed.
CMDRJE Executing 2E21 900D The program products of Resource Partition
Manager are not installed.
CMDRJE Executing 2E21 9305 The information for the virtual storage machine is
set in the specified resource.
CMDRJE Executing 2E21 930B A virtual storage machine cannot be created
because the virtual storage machine with the
specified serial number already exists.
CMDRJE Executing 2E22 2200 You cannot execute this command because of
either reason below.
• A resource group cannot be created because
the specified resource group name is
duplicated.
• A resource group name cannot be changed
because the specified resource group name is
duplicated.
CMDRJE Executing 2E22 2201 A resource cannot be added to a resource group
because the specified resource belongs to the
resource group.
CMDRJE Executing 2E22 2203 A resource cannot be added to the resource group
because the specified LDEV number is not the top
LDEV number in the LUSE volume.
CMDRJE Executing 2E23 2200 Any more resource groups cannot be created
because the registered number of resource groups
has reached the maximum.
CMDRJE Executing 2E23 2201 A virtual storage machine cannot be created
because the number of registered virtual storage
machines has reached the maximum.
CMDRJE Executing 2E30 2201 The operation to resource group 0 (meta_resource)
cannot be performed.
CMDRJE Executing 2E30 8402 The attribute of the specified port is Initiator or
External.
CMDRJE Executing 2ECA FEEC An internal error occurred.
Call Hitachi Data Systems customer support.
CMDRJE Executing 2EF3 2202 The specified operation cannot be performed
because it is not supported.
CMDRJE Executing B980 B903 The command was rejected because the selected
resource belongs to NAS_Platform_System_RSG.
CMDRJE Executing B980 B904 The command was rejected because the selected
resource group belongs to
NAS_Platform_System_RSG.
9-158
Troubleshooting
Command Control Interface User and Reference Guide
To Next Page
Loading...
