28
TROUBLESHOOTING
Symptom Check List
HDMI Control
HDMI Controls Do Not Function - Check the connections between the panel and the HDMI equipment.
- Conrm that the settings for the panel are correct.
- Conrm that the equipment is HDMI compliant.
- Conrm that settings for the equipment are correct.
No Picture and Sound - Check the connections between the panel and the HDMI equipment.
- Conrm that settings for the equipment are correct.
No Picture - Check the connections between the panel and the HDMI equipment.
- Conrm that settings for the equipment are correct.
No Sound - Check the connections between the panel and the HDMI equipment.
- Conrm that settings for the equipment are correct.
- Check that the AV system is connected to an HDMI terminal and any recorder/
player is connected to another HDMI terminal.
Media Player
USB devices are not recognized - Check if it contain the supported les.
- No USB hub is supported. When using a home network, connect directly to the
devices’s USB port.
- Check if the speed of the device is sufcient (poor device speed may result in
interrupted or delayed display of images due to a bit-rate problem). When using a
digital camera that is not Mass Storage Class compliant, insert the Flash Memory
card into the multi-card reader.
Photo data stored in a digital still camera
cannot be read through USB interface.
- Check if the device is connectable to the at panel TV.
- Check if the digital still camera is turned on.
- Check if the digital still camera is in viewing mode.
Photo slideshow doesn’t start - Check if the player is in pause, rotation or zoom mode. If it is, press PLAY or
ENTER to start the slideshow.
To Next Page
Loading...
Need help?
General
