-2-
5. SPECIFICATIONS
5-1. Specifications
(1) Gas finish nailer
Model
Item
NT 65GB
Driving system
Reciprocating piston type
Weight 1.8 kg (4.0 lbs.)
Dimensions
(length x height x width)
268 x 282 x 85 mm
(10-5/8” x 11-1/8” x 3-3/8”)
Nail feed system
Ribbon spring
Nail capacity
100 nails (2 strip)
Packaging
Plastic case
Package dimensions
(length x height x width)
500 x 460 x 150 mm
(19-11/16” x 18-5/32” x 5-29/32”)
420 x 427 x 165 mm
(16-35/64” x 16-13/16” x 6-1/2”)
Standard accessories
-For North America-
• Safety glasses (Code No. 875769)
• Battery (Code No. 324147) x 2
• UC 3SML Charger
(with AC/DC adapter)
• Case (Code No. 886857)
• Allen wrench for M5 screws
(Code No. 944458)
• Allen wrench for M4 screws
(Code No. 943277)
• Nose Cap (Code No. 886349)
-For Europe-
• Safety glasses (Code No. 885549)
• Battery (Code No. 324148) x 2
• UC 3SML Charger
(with AC/DC adapter)
• Case (Code No. 886857)
• Allen wrench for M5 screws
(Code No. 944458)
• Allen wrench for M4 screws
(Code No. 943277)
• Nose Cap (Code No. 886349)
Optional accessories
-For North America-
• Lubricant oil (A)
(Code No. 885546)
• Fuel cell (Code No. 728981)
• Grease (Code No. 317918)
• UC 3SFL Charger
-For Europe-
• Lubricant oil (A)
(Code No. 885246)
• Fuel cell (Code No. 753700)
• Grease (Code No. 317918)
• UC 3SFL Charger
5-2. Explanation of the Nailing Action
To meet the requirements of "ANSI SNT-101-2002" (USA), the Model NT 65GB is equipped with
a FULL SEQUENTIAL ACTUATION MECHANISM.
• FULL SEQUENTIAL ACTUATION MECHANISM
First, press the pushing lever against the wood, and then pull the trigger to drive the nail. After
nailing once, nailing will not be possible again until you release the trigger and press the lever
again.
To Next Page
Loading...
Need help?
General
