Hitachi P42A01 Service Manual

C-1
SERVICE MODE LIST
This unit is provided with the following SERVICE MODES so you can repair, examine and adjust easily.
To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote
control for more than the standard time in the appropriate condition. (See below chart.)
Set Key Operations
Remocon
Key
Standard
Time
Set
Condition
Initialization of factory TV data.
NOTE:
If you set factory initialization, the memories are reset
such as the channel setting, and the POWER ON total
hours.
Can be checked of the INITIAL DATA of MEMORY IC.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
VOL. DOWN
(Minimum)
1 2 sec.
VOL. DOWN
(Minimum)
6 2 sec.
VOL. DOWN
(Minimum)
9 2 sec.
POWER ON
ALL mode
POWER ON
Display of the Adjustment MENU on the screen.
Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display
Adjustment).
VOL. DOWN
(Minimum)
8
ALL mode
Check of the SUM DATA, POWER ON total hours and MICON
VERSION on the screen.
Refer to the "WHEN REPLACING EEPROM (MEMORY) IC".
2 sec.

Hitachi P42A01 Specifications

General

Brand	Hitachi
Model	P42A01
Category	Plasma TV
Language	English