38
Power cord and power source
Unstable
WARNING
Installing the refrigerator
WARNING
CAUTION
Indicates hazardous or unsafe practices
that might result in severe personal injury,
damage to property, or death.
Indicates hazardous or unsafe practices
that might result in personal injury or
damage to property.
Indicates prohibited actions.
Indicates required actions.
■The following labels are used to indicate the severity of
injury or damage that might result if precautions are ignored.
■
This refrigerator uses ammable refrigerant. The following symbol is used to indicate guidelines related to the refrigerant.
■The following symbols are used to
indicate actions that are prohibited
and those that are required.
Indicates precautions related to the ammable refrigerant.
SAFETY PRECAUTIONS
Be sure to follow
these precautions.
Failure to follow these safety precautions might result in injury or damage to property.
To avoid a hazard due to instability of the
appliance, it must be fixed in accordance
with the instructions.
Take measures to prevent the refrigerator
from falling over, for example, in the event
of an earthquake.
If the refrigerator falls over, it could cause injury.
Use only rated AC power sources.
Choose a power source suitable for
the refrigerator’s electrical specifications.
Use an outlet with a rating of 10A or higher. Do not
plug other appliances into the same outlet, as this
might cause the power cord to heat up and lead to
fire.
Firmly insert the power plug
into the outlet so that the
power cord is oriented
downward.
If the power cord is oriented
upwards, this might strain the cord,
resulting in overheating or
short-circuiting, which can in turn cause electric
shock or fire. These risks also apply to cases where
the power plug is not inserted firmly.
When positioning the appliance, ensure the
supply cord is not trapped or damaged.
Do not cut, modify, twist, overextend, bind (or tie up), or
forcefully bend the power cord. In addition, ensure that
the cord is does not touch any hot objects or surfaces,
does not get caught under heavy
objects, and is not wedged between
the refrigerator and the wall.
Using a damaged power cord might
cause electric shock, short-circuiting,
or fire.
If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
Periodically clean the power
plug.
Dust on the plug might impair the
electrical insulation and lead to fire.
Unplug the power cord, and wipe
the plug with a dry dishcloth.
Do not install the refrigerator
where it might get wet.
・If the refrigerator gets wet,
the electrical insulation of
the refrigerator might become
impaired, leading to an increased
risk of electric shock or fire.
To Next Page
Loading...
Need help?
General
