Hitachi RCIM-1.5FSRE - Removal Of The Fan Parts

7 Servicing
RPI(L/H)-(0.4-6.0)FSRE - Ducted indoor unit
SMGB0137 rev.0 - 05/2021
229
7
7.5.9 Removal of the fan parts

RPI-(1.5-2.0)FSRE
1 Remove the motor cover as explained in “7.5.4 Removal of the motor cover”.
2 Remove the casing screws (2 screws in the casing assy).
3 Press the locks and remove half of the fan casing.
4 Remove the motor support screws.
5 Loosen xing screw for the fan runner with a hexagon wrench and remove the fan runner from the motor shaft.
6 Remove the runner from the casing.
7 Then remove the fan motor.
? NOTE
If the fan casing is to be fully removed, remove the screws securing the other half to the fan motor xture.
Locks
Motor support screws
Casing screw
Bottom side
RPI-(1.5-2.0)FSRE