7 Servicing
RPK-FSR(H)M - Wall mounted
SMGB0137 rev.0 - 05/2021
256
11 When mounting the heat exchanger, mount it in the reverse procedure.
? NOTE
Before mounting the heat exchanger, check to ensure that there is no clearance between the heat exchanger and the motor clamp in order
to prevent dew drops.
Fixing screw for right
side Heat Exchanger
Fixing screw for left side Heat
Exchanger
Cabinet
Resin plate of
left side Heat
Exchanger
Pull the resin plate up in the direction
of the arrow to disconnect the catch.
Slotted portion
Take the heat exchanger out of the
body as like pulling it up.
To Next Page
Loading...
