This chapter describes the procedure of test run of the Air cooled water chillers and the Air to water heat pump chillers.
....................................................................................................................
2.1. Check before test run
...........................................................................................................................
.........................................................................................................................................................
2.1.2. Refrigerant System
......................................................................................................................................
..........................................................................................................................................
...............................................................................................................................................
2.2. Test run method and check
..................................................................................................................
2.2.1. Check before Test Run
.................................................................................................................................
2.2.2. Cooling operation (low pressure, high pressure)
.........................................................................................
2.2.3. Heating operation (low pressure, high pressure)
.........................................................................................
2.2.4. Electrical consumption percentage
..............................................................................................................
...............................................................................................................................
2.3.1. Check of high pressure switch (cooling operation)
......................................................................................
2.3.2. Check of low pressure cut control
................................................................................................................
2.3.3. Temperature controller
.................................................................................................................................
2.3.3. Temperature controller .................................................................................................................................2.3.3. Temperature controller
2.3.4. Check of refrigerant leakage
........................................................................................................................
2.4. Instruction at delivery
............................................................................................................................
..................................................................................................................................
2.5.1. During product and electrical installation
.....................................................................................................
...........................................................................................................................................
2.5.3. During repair and relocation
.........................................................................................................................
..............................................................................................................................................