Hitachi RCUE60AG1 User Manual

CONTROLLER ADJUSTMENT
8
/
21
8. CONTROLLER ADJUSTMENT
$ High Cut Check (Fan Stop for Checking)
% Chilled Water Temperature Setting
(STANDARD: "+07")
& Defrosting Set by Ambient Temperature (Heat Pump)
(NOT AVAILABLE)
' Continuous Capacity Control Setting
(STANDARD)
( Compressor starting Delay Time
(STANDARD: 3 min)
) Mode Set Switch A
(DEPEND ON MODEL)
* Manual Defrost (Heat Pump)
(NOT AVAILABLE)
5 Optional Function B
(STANDARD: ALL OFF)
6 Optional Function C
(STANDARD: ALL OFF)
7 Mode Set Switch B
8 Local/Remote Changeover Switch
(STANDARD: "Remote")
9 Cool/Heat Changeover Switch
(STANDARD: "Cool")
: Unit Type Setting
(STANDARD: RSW6 and RSW5 is "9") (RSW7: NOT
AVAILABLE)
; Neutral Zone Setting
(STANDARD: "3")
< Hot Water Temperature Setting for Heat Pump
(NOT AVAILABLE)
= Optional Function A (Outernals signals, Self-Checking mode)
(STANDARD: ALL OFF)
> Pump Operation
(STANDARD: OFF)
SWITCH POSITION
ON
OFF
ON
ON
OFF
OFF
LED
PUSH
BUTTON
SWITCH
7 SEGMENTS
Cool
Heat
Local
Remote

Hitachi RCUE60AG1 Specifications

General

Brand	Hitachi
Model	RCUE60AG1
Category	Chiller
Language	English