2-32
SERVICING
(2.1 Outdoor Unit)
TURN OFF all power source switches.
(2) Others
Other parts located at the rear side of PCB mounting plate and AC chopper mounting plate should be
replaced as follows.
(a) Remove two (2) screws fixing the mounting plate for the PCB and turn the plate towards the front
side.
(b) Remove two (2) screws fixing the mounting plate for the AC chopper and turn the plate
towards the front side.
Phillips ScrewdriverTool
(3) Removing Magnetic Contactor for Inverter Compressor
(a) Remove two (2) screws fixing the mounting plate for the PCB and turn the plate towards the front
side.
(b) Remove two (2) screws fixing the magnetic contactor for inverter compressor.
Phillips ScrewdriverTool
Mounting Plate
for AC Chopper
Mounting Plate
for PCB
Mounting Plate
for PCB
Mounting Plate
for PCB
Mounting Contactor for
Inverter Compressor
To Next Page
Loading...
