Hitachi SJ-P1 Series - Supported Inverters; About the Installation

5-2
Chapter 5
Installation and Configuration
5.2 Supported inverters
The P1-EN can be attached to all types of SJ-P1.
However, depending on the SJ-P1 manufacture
date, it might not support the P1-EN. Please check
the version of the inverter which is written on the
name plate of it (the name plate example is shown
on the image to the right.) If the version is 2.00 or
higher it can support the P1-EN.
5.3 Installation
5.3.1 About the installation
The P1-EN can be attached to any of the 3 option
slots of the SJ-P1.
Option cassette connection slots
VOP keypad
RJ45
USB(micro-B)
SLOT1 SLOT2 SLOT3
It can be attached to
either SLOT1, 2 or 3.
Model: P1-00330-LFF
Hitachi Industrial Equipment Systems
Co.,Ltd.
MADE IN JAPAN
Ver.2.00
INVERTER
Input/Entrée :50Hz,60Hz 200–240V 3ph ** / ** / ** A
Output/Sortie : 0- 590Hz 200–240V 3ph ** / ** / ** A
MFG No. 62AA****** BB001
Date:****
NE*****-**
SJ series type P1
Version