Hitachi SJ-P1 Series - Other Configuration Parameters

6-7
Chapter 6
Inverter Settings
6.2.4 Other parameters
In addition to the configurations explained in
sections 6.2.2 and 6.2.3, please verify the
configuration of the following parameters when
using this device.
・[CF-11]: Function for transforming the
register data from A, V to %
When using this device please select the
00(A, V) setting.
・[oA-11]: Communication Watch Dog
Timer (SLOT-1)
・[oA-21]: Communication Watch Dog
Timer (SLOT-2)
・[oA-31]: Communication Watch Dog
Timer (SLOT-3)
This setting is unavailable for this device. Please
do not change the setting.
・[oA-12]: Action selection at
communication error (SLOT-1)
・[oA-22]: Action selection at
communication error (SLOT-2)
・[oA-32]: Action selection at
communication error (SLOT-3)
This setting is unavailable for this device. Please
do not change the setting.