Parameter Settings for Keypad Entry
Appendix B
B–4
A38 Jog frequency setting 1.0 1.0
A39 Jog stop mode 00 00
A41 Torque boost method selection 0 0
A241 Torque boost method selection, 2nd
motor
00
A42 Manual torque boost value 11 11
A242 Manual torque boost value, 2nd
motor
11 11
A43 Manual torque boost frequency
adjustment
10.0 10.0
A243 Manual torque boost frequency
adjustment, 2nd motor
10.0 10.0
A44 V/F characteristic curve selection 02 02
A244 V/F characteristic curve selection,
2nd motor
02 02
A45 V/F gain setting 100 100
A51 DC braking enable 00 00
A52 DC braking frequency setting 0.5 0.5
A53 DC braking wait time 0.0 0.0
A54 DC braking force setting 0 0
A55 DC braking time setting 0.0 0.0
A61 Frequency upper limit setting 0.0 0.0
A62 Frequency lower limit setting 0.0 0.0
A63, A65,
A67
Jump (center) frequency setting 0.0 0.0
A64, A66,
A68
Jump (hysteresis) frequency width
setting
0.5 0.5
A71 PID Function Enable 00 00
A72 PID proportional gain 1.0 1.0
A73 PID integral time constant 1.0 1.0
A74 PID derivative gain 0.0 0.0
A75 PV scale conversion 1.00 1.00
A76 PV source setting 00 00
A81 AVR function select 02 02
A82 AVR voltage select 230/400 230/460
“A” Group Parameters Default Setting
User Setting
Func. Code Name -FE (Europe) -FU (USA)