SJ100 Inverter
Appendix B
B–3
Standard Functions
“A” Group Parameters Default Setting
User Setting
Func. Code Name -FE (Europe) -FU (USA)
A01 Frequency source setting 01 01
A02 Run command source setting 01 01
A03 Base frequency setting 50.0 60.0
A203 Base frequency setting, 2nd motor 50.0 60.0
A04 Maximum frequency setting 50.0 60.0
A204 Maximum frequency setting, 2nd
motor
50.0 60.0
A11 External frequency output zero
reference
00
A12 External frequency output span refer-
ence
00
A13 External frequency input bias start 0 0
A14 External frequency input bias end 100 100
A15 External frequency offset enable 01 01
A16 External frequency filter time const. 8 8
A20 Multi-speed 0 setting 0 0
A220 Multi-speed 0 setting, 2nd motor 0 0
A21 Multi-speed 1 setting 0 0
A22 Multi-speed 2 setting 0 0
A23 Multi-speed 3 setting 0 0
A24 Multi-speed 4 setting 0 0
A25 Multi-speed 5 setting 0 0
A26 Multi-speed 6 setting 0 0
A27 Multi-speed 7 setting 0 0
A28 Multi-speed 8 setting 0 0
A29 Multi-speed 9 setting 0 0
A30 Multi-speed 10 setting 0 0
A31 Multi-speed 11 setting 0 0
A32 Multi-speed 12 setting 0 0
A33 Multi-speed 13 setting 0 0
A34 Multi-speed 14 setting 0 0
A35 Multi-speed 15 setting 0 0
To Next Page
Loading...
Need help?
General