Hitachi SJ100 Series - Page 16

SJ100 Inverter
Appendix B
B–7
Intelligent Terminal Functions
“C” Group Parameters Default Setting
User Setting
Func. Code Name -FE (Europe) -FU (USA)
C01 Terminal 1 function 00 00
C02 Terminal 2 function 01 01
C03 Terminal 3 function 02 16
C04 Terminal 4 function 03 13
C05 Terminal 5 function 18 09
C06 Terminal 6 function 09 18
C11 Terminal 1 active state 00 00
C12 Terminal 2 active state 00 00
C13 Terminal 3 active state 00 00
C14 Terminal 4 active state 00 01
C15 Terminal 5 active state 00 00
C16 Terminal 6 active state 00 00
C21 Terminal 11 function (logical) 01 01
C22 Terminal 12 function (logical) 00 00
C23 Terminal FM function (analog) 00 00
C24 Alarm relay terminal function
(logical)
05 05
C31 Terminal 11 active state 00 00
C32 Terminal 12 active state 00 00
C33 Alarm relay active state 01 01
C41 Overload level setting Inverter rated
current
Inverter rated
current
C42 Frequency arrival setting for accel. 0.0 0.0
C43 Arrival frequency setting for decel. 0.0 0.0
C44 PID deviation level setting 3.0 3.0
C81 Analog meter adj., voltage input Factory-set Factory-set
C82 Analog meter adj., current input Factory-set Factory-set
C91 Debug mode selection 00 00 Do not edit
C92 Core monitor address 0000 0000 Do not edit
C93 Core monitor date ——Do not edit
C94 Core set address d001 d001 Do not edit
C95 Core set date 00 00 Do not edit