Hitachi SJ100 Series - Page 17

Parameter Settings for Keypad Entry
Appendix B
B–8
Sensorless Vector Functions
“H” Group Parameters Default Setting
User Setting
Func. Code Name -FE (Europe) -FU (USA)
H21 Auto-tuning Setting 00 00
H02 Motor data selection 00 00
H202 Motor data selection, 2nd motor 00 00
H03 Motor capacity Specified by
the inverter
capacity
Specified by
the inverter
capacity
H203 Motor capacity, 2nd setting Specified by
the inverter
capacity
Specified by
the inverter
capacity
H04 Motor poles setting 4 4
H204 Motor poles setting, 2nd motor 4 4
H05 Motor constant Kp 20 20
H205 Motor constant Kp, 2nd motor 20 20
H06 Motor stabilization constant 100 100
H206 Motor stabilization constant, 2nd
motor
100 100
H20 Motor constant R1 Factory set Factory set
H220 Motor constant R1, 2nd motor Factory set Factory set
H21 Motor constant R2 Factory set Factory set
H221 Motor constant R2, 2nd motor Factory set Factory set
H22 Motor constant L Factory set Factory set
H222 Motor constant L, 2nd motor Factory set Factory set
H23 Motor constant Io Factory set Factory set
H223 Motor constant Io, 2nd motor Factory set Factory set
H24 Motor Constant J Factory set Factory set
H224 Motor constant J, 2nd motor Factory set Factory set