Hitachi SJ100 Series

SJ100 Inverter
Appendix B
B–9
Parameter Settings for DOP/DRW/DOP Plus
SJ100 series inverters provide many functions and parameters which can be configured
by the user. We recommend that you record all parameters which have been edited, in
order to help in troubleshooting or recovery from a loss of parameter data.
Monitor Mode Parameters
Inverter model
MFG. No.
SJ100
}
This information is printed
on the specification label
located on the right side of
the inverter.
Monitor Mode Setup Displayed Default Setting
User Setting
Func.
Code
Name -FE (Europe) -FU (USA)
Mon. Frequency setting TM 026.4 0.0Hz TM 031.6 0.0Hz
Acceleration time ACC 0010.0s ACC 0010.0s
Acceleration time, 2nd
motor
2ACC 0010.0s 2ACC 0010.0s
Deceleration time DEC 0010.0s DEC 0010.0s
Deceleration time, 2nd
motor
2DEC 0010.0s 2DEC 0010.0s
Frequency setting F-SET-SELECT TRM F-SET-SELECT TRM
Frequency source select F/R-SELECT TRM F/R-SELECT TRM
Scaled frequency value /Hz01.0 0.00 /Hz01.0 0.00
Output current display Im 0.0A 0.0% Im 0.0A 0.0%
Manual torque boost V-Boost code 11 V-Boost code 11
Manual torque boost,
2nd motor
2V-Boost code 11 2V-Boost code 11
Torque boost frequency
setting
V-Boost F 10.0% V-Boost F 10.0%
Torque boost frequency
setting, 2nd motor
2V-Boost F 10.0% 2V-Boost F 10.0%
Torque boost mode V-Boost Mode 0 V-Boost Mode 0
Torque boost mode, 2nd
motor
2V-Boost Mode 0 2V-Boost Mode 0
Output voltage gain adj. V-Gain 100% V-Gain 100%
Jog frequency Jogging 1.00Hz Jogging 1.00Hz
Jog mode select Jog Mode 0 Jog Mode 0