Hitachi SJ100 - Page 117

SJ100 Inverter
Configuring
Drive Parameters
3–45
H_24 Motor Constant J Ratio (unit-less), range is
1.0 to 1000
✘ Factory set according
to inverter model
—
AUX J 0020.0
H224 Motor constant J,
2nd motor
Ratio (unit-less), range is
1.0 to 1000
✘ Factory set according
to inverter model
—
2AUXJ 0020.0
H_30 Auto-tuned motor
constant R1
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H230 Auto-tuned motor
constant R1, 2nd motor
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H_31 Auto-tuned motor
constant R2
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H231 Motor constant R2, 2nd
motor
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H_32 Auto-tuned motor
constant L
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H232 Auto-tuned motor
constant L, 2nd motor
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H_33 Auto-tuned motor
constant I
o
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H233 Auto-tuned motor
constant I
o
, 2nd motor
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H_34 Auto-tuned motor
constant J
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
H234 Auto-tuned motor
constant J, 2nd motor
Auto-tuning data (do not edit) ✘ Factory set according
to inverter model
—
(not displayed)
“H” Function
Run
Mode
Edit
Defaults
Func.
Code
Name /
SRW Display
Description
–FE
(CE)
–FU
(UL)
–FR
(Jpn)
Units