Hitachi SJ100 - Page 197

Parameter Settings for Keypad Entry
Appendix B
B–4
A_32 Multi-speed 12 setting 0 0 0
A_33 Multi-speed 13 setting 0 0 0
A_34 Multi-speed 14 setting 0 0 0
A_35 Multi-speed 15 setting 0 0 0
A_38 Jog frequency setting 1.0 1.0 1.0
A_39 Jog stop mode 00 00 00
A_41 Torque boost method selection 00 00 00
A241 Torque boost method selection,
2nd motor
00 00 00
A_42 Manual torque boost value 11 11 11
A242 Manual torque boost value, 2nd
motor
11 11 11
A_43 Manual torque boost frequency
adjustment
10.0 10.0 10.0
A243 Manual torque boost frequency
adjustment, 2nd motor
10.0 10.0 10.0
A_44 V/f characteristic curve selection 02 02 02
A244 V/f characteristic curve selection,
2nd motor
02 02 02
A_45 V/f gain setting 100 100 100
A_51 DC braking enable 00 00 00
A_52 DC braking frequency setting 0.5 0.5 0.5
A_53 DC braking wait time 0.0 0.0 0.0
A_54 DC braking force during deceler-
ation
000
A_55 DC braking time for deceleration 0.0 0.0 0.0
A_61 Frequency upper limit setting 0.0 0.0 0.0
A_62 Frequency lower limit setting 0.0 0.0 0.0
A_63,
A_65,
A_67
Jump (center) frequency setting 0.0 0.0 0.0
A_64,
A_66,
A_68
Jump (hysteresis) frequency
width setting
0.5 0.5 0.5
A_71 PID Enable 00 00 00
“A” Group Parameters Default Setting
User
Setting
Func.
Code
Name
-FE
(Europe)
-FU
(USA)
–FR
(Japan)