Hitachi SJ300 Series

“B” Group: Fine-Tuning Functions
Configuring Drive
Parameters
3–42
B085 Country code for initial-
ization
Select default parameter
values for country on initial-
ization, four option codes:
00 Japan version
01 Europe version
02 US version
03 reserved (do not set)
✘ ✘ 01 02 00 —
>b085 INITIAL
SELECT USA
B086 Frequency scaling
conversion factor
Specify a constant to scale
D007 to display in engineer-
ing units.
Range is 0.1 to 99.9
✔ ✔ 1.0 1.0 1.0 —
>b086 F-CONV
Gain 001.0
B087 STOP key enable Select whether the STOP
key on the keypad is enabled
(req. A002=01, 03, 04, or
05). Two option codes:
00 Enable
01 Disable
✘ ✔ 00 00 00 —
>b087 STOP-SW
SELECT ON
“B” Function
Run
Mode
Edit
Lo Hi
Defaults
Units
SRW Display
Func.
Code
Name Description
–FE
(EU)
–FU
(US)
–FR
(JP)