Hitachi SJ700 Series - Function List; Monitoring Functions and Main Profile Parameters

To Next Page

To Previous Page

FUNCTION LIST

●

MONITORING FUNCTIONS and MAIN PROFILE PARAMETERS

［◯

= Allowed

= Not permitted

］

Code Function Name Monitored data or setting

Default Setting

Setting

during

operation

(allowed or not)

Change

during

operation

(allowed or not)

SJ700/SJ700D(CTmode)

SJ700B

-FE -FU -F -F -FU

Monitor Mode

d001

Output frequency monitor

0.00 to 99.99, 100.0 to 400.0 (Hz) (*1)

- - - - -

◯

d002

Output current monitor

0.0 to 999.9, 1000 to 9999 (A)

- - - - - - -

d003

Rotation direction minitoring

F (forward rotation), o (stopped), r (reverse rotation)

- - - - - - -

d004

Process variable (PV), PID feedback monitor

0.00 to 99.99, 100.0 to 999.9, 1000. to 9999. 1000 to 9999 (10000 to 99990),

「

100 to

「

999 (10000 to 999000)

- - - - - - -

d005

Intelligent input terminal status

(Example) FW, 7, 2, 1 : ON

8, 6, 5, 4, 3 : OFF

- - - - - - -

d006

Intelligent output terminal status

(Example) 12, 11 : ON

AL, 15, 14, 13 :OFF

- - - - - - -

d007

Scaled output frequency monitoring

0.00 to 99.99, 100.0 to 999.9, 1000. to 9999., 1000 to 3996 (10000 to 39960)

- - - - -

◯

d008

Actual-frequency monitoring

(*3) -400. to -100., -99.9 to 0.00 to 99.99, 100.0 to 400.0 (Hz) (*2)

- - - - - - -

d009

Torque command monitoring

(*3) -200. to +200. (%)

- - - - - - -

d010

Torque bias monitoring

(*3) -200. to +200. (%)

- - - - - - -

d012

Torque monitoring

-200. to +200. (%)

- - - - - - -

d013

Output voltage monitoring

0.0 to 600.0 (V)

- - - - - - -

d014

Power monitoring

0.0 to 999.9 (kW)

- - - - - - -

d015

Cumulative power monitoring

0.0 to 999.9, 1000. to 9999.,1000 to 9999 (10000 to 99990),

「

100 to

「

999 (100000 to 999000)

- - - - - - -

d016

Cumulative operation RUN time monitoring

0. to 9999., 1000 to 9999 (10000 to 99990),

「

100 to

「

999 (10000 to 999000) (hr)

- - - - - - -

d017

Cumulative power-on time monitoring

0. to 9999., 1000 to 9999 (10000 to 99990),

「

100 to

「

999 (10000 to 999000) (hr)

- - - - - - -

d018

Heat sink temperature monitoring

-020. to 200.0 (͵)

- - - - - - -

d019

Motor temperature monitoring

-020. to 200.0 (͵)

- - - - - - -

d022

Life-check monitoring

1: Capacitor on main circuit board

2: Cooling-fan speed drop

- - - - - - -

d023

Program counter

0 to 1024

- - - - - - -

d024

Program number monitoring

0000 to 9999

- - - - - - -

d025

User monitor 0

-2147483647 to 2147483647 (upper 4 digits including “-“)

- - - - - - -

d026

User monitor 1

-2147483647 to 2147483647 (upper 4 digits including “-“)

- - - - - - -

d027

User monitor 2

-2147483647 to 2147483647 (upper 4 digits including “-“)

- - - - - - -

d028

Pulse counter

0 to 2147483647 (upper 4 digits)

- - - - - - -

d029

Position setting monitor

(*3) -1073741823 to 1073741823 (upper 4 digits including “-“)

- - - - - - -

d030

Position feedback monitor

(*3) -1073741823 to 1073741823 (upper 4 digits including “-“)

- - - - - - -

d031

Clock monitor

(SJ700D only) * In case you use WOP (option), this monitor is activated.

- - -

××

- -

d060

Inverter mode monitor

(SJ700D only) I-C (CT) / I-v (VT)

- - -

××

- -

d080

Trip Counter

0. to 9999., 1000 to 6553 (10000 to 65530) (times)

- - - - - - -

d081

d086

Trip monitoring 1-6

Factor, frequency (Hz), current (A), voltage across P-N (V),

running time (hours), power-on time (hours)

- - - - - - -

d090

Programming error monitoring

Warning code

- - - - - - -

d102

DC voltage monitoring

0.0 to 999.9 (V)

- - - - - - -

d103

BRD load factor monitoring

0.0 to 100.0 (%)

- - - - - - -

d104

Electronic thermal overload monitoring

0.0 to 100.0 (%)

- - - - - - -

Setting Mode

F001

Output frequency setting

0.0, "start frequency" to "maximum frequency" (or maximum frequency,

2nd/3rd motors) (Hz)

0.0 to 100.0 (when PID function is enabled)

0.00 0.00 0.00 0.00 0.00

◯◯

F002

Acceleration (1) time setting